From c13f20ccca87e10f25bcd3241ee55115a904d624 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 21 Aug 2013 20:01:32 +0530 Subject: [PATCH 21/58] ARM: dts: OMAP5: add palmas-usb node Without this node, there will be no palmas driver to notify dwc3 that a cable has been connected and, without that, dwc3 will never initialize. Signed-off-by: Felipe Balbi [kishon@ti.com: added dt properties for enabling vbus/id interrupts and fixed vbus-supply value after SMPS10 is modeled as 2 regulators] Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5-uevm.dts | 12 ++++++++++++ arch/arm/boot/dts/omap5.dtsi | 2 +- 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 05b9b12..da25a14 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -272,6 +272,13 @@ interrupt-controller; #interrupt-cells = <2>; + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + ti,wakeup; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; @@ -479,6 +486,11 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + &mcspi1 { }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index ecc06a9..6192c45 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -634,7 +634,7 @@ ti,type = <2>; }; - omap_dwc3@4a020000 { + usb3: omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; reg = <0x4a020000 0x10000>; -- 1.8.4.rc3