From 42f514d9989162596dda357200ae94e14232201a Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Wed, 18 Sep 2013 12:11:15 -0500 Subject: [PATCH 23/23] test: ARM: omap3-beagle-xm.dts: add display information TODO: get the i2c/twl pd gpio working... Signed-off-by: Robert Nelson --- arch/arm/boot/dts/omap3-beagle-xm.dts | 39 +++++++++++++++++++++++++++++++---- 1 file changed, 35 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 2e88095..f145314 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -179,14 +179,14 @@ &twl_gpio { ti,use-leds; - /* pullups: BIT(1) */ - ti,pullups = <0x000002>; + /* pullups: BIT(1), BIT(2) */ + ti,pullups = <0x000006>; /* * pulldowns: - * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(6), BIT(7), BIT(8), BIT(13) * BIT(15), BIT(16), BIT(17) */ - ti,pulldowns = <0x03a1c4>; + ti,pulldowns = <0x03a1c0>; }; &usb_otg_hs { @@ -213,3 +213,34 @@ &usbhsehci { phys = <0 &hsusb2_phy>; }; + +&dpi { + vdds_dsi-supply = <&vpll2>; +}; + +/ { + aliases { + display0 = &dvi0; + display1 = &tv0; + }; + + tfp410: encoder@0 { + compatible = "ti,tfp410"; + video-source = <&dpi>; + data-lines = <24>; + /* At some point we will need this, but at the momment we just get a blank screen */ + /* gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; */ + /* gpios = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; */ + }; + + dvi0: connector@0 { + compatible = "ti,dvi_connector"; + video-source = <&tfp410>; + i2c-bus = <&i2c3>; + }; + + tv0: connector@1 { + compatible = "ti,svideo_connector"; + video-source = <&venc>; + }; +}; -- 1.8.4.rc3