From e672fd68abb6b8e7b7d27ad67932bd49945f813d Mon Sep 17 00:00:00 2001 From: Koen Kooi <koen@dominion.thruhere.net> Date: Thu, 12 Sep 2013 20:35:33 +0200 Subject: [PATCH 28/58] ARM: dts: am335x-boneblack: add eMMC DT entry The pinmux is specified in am335x-bone-common.dtsi to be reused by the eMMC cape. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Tested-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Nishanth Menon <nm@ti.com> [bcousson@baylibre.com: Fix traling spaces and useless comments] Signed-off-by: Benoit Cousson <bcousson@baylibre.com> --- arch/arm/boot/dts/am335x-bone-common.dtsi | 22 ++++++++++++++++++++++ arch/arm/boot/dts/am335x-boneblack.dts | 13 +++++++++++++ 2 files changed, 35 insertions(+) @ arch/arm/boot/dts/am335x-bone-common.dtsi:116 @ 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ >; }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; }; ocp { @ arch/arm/boot/dts/am335x-bone-common.dtsi:260 @ regulator-always-on; }; }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &cpsw_emac0 { @ arch/arm/boot/dts/am335x-boneblack.dts:18 @ regulator-max-microvolt = <1800000>; regulator-always-on; }; -- + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; + ti,vcc-aux-disable-is-sleep; +}; 1.8.4.rc3