From 4a7f88016779de9fabb258fda6b2e3f5059fe3e3 Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Thu, 12 Sep 2013 20:35:35 +0200 Subject: [PATCH 30/58] ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers This matches the vendor 3.8.x configuration that is shipping with the boards. The LED layout is now: USR0: heartbeat USR1: mmc0 (micro-SD slot) USR2: cpu0 USR3: mmc1 (eMMC) The cpu0 triggers was put in between the mmc triggers to make is easier to see where the disk activity is. Signed-off-by: Koen Kooi Tested-by: Kevin Hilman Reviewed-by: Nishanth Menon Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/am335x-bone-common.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index fbb11dd..56361ce 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -204,12 +204,14 @@ led@4 { label = "beaglebone:green:usr2"; gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; default-state = "off"; }; led@5 { label = "beaglebone:green:usr3"; gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; default-state = "off"; }; }; -- 1.8.4.rc3