This patch adds bindings for qfprom found in QCOM SOCs. QFPROM driver
is based on simple eeprom framework.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
 .../devicetree/bindings/eeprom/qfprom.txt          | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/eeprom/qfprom.txt

diff --git a/Documentation/devicetree/bindings/eeprom/qfprom.txt b/Documentation/devicetree/bindings/eeprom/qfprom.txt
new file mode 100644
index 0000000..21a7104
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/qfprom.txt
@@ -0,0 +1,34 @@
+= Qualcomm QFPROM device tree bindings =
+
+This binding is intended to represent QFPROM which is found in most QCOM SOCs.
+
+Required properties:
+- compatible: should be "qcom,qfprom"
+- reg: Should contain registers location and length
+
+= Data cells =
+Are child nodes of qfprom, bindings of which as described in
+bindings/eeprom/eeprom.txt
+
+Example:
+
+       qfprom: qfprom@00700000 {
+               compatible      = "qcom,qfprom";
+               reg             = <0x00700000 0x8000>;
+               ...
+               /* Data cells */
+               tsens_calibration: calib@404 {
+                       reg = <0x4404 0x10>;
+               };
+       };
+
+
+= Data consumers =
+Are device nodes which consume eeprom data cells.
+
+For example:
+
+       tsens {
+               ...
+               calibration = <&tsens_calibration>;
+       };
-- 
1.9.1