OSADL QA Farm on Real-time of Mainline Linux
About - Hardware - CPUs - Benchmarks - Graphics - Benchmarks - Kernels - Boards/Distros - Latency monitoring - Latency plots - System data - Profiles - Compare - Awards
Profile of system in rack #a, slot #4 (as of Tue Oct 08, 2024 at 03:18:02)
Rack #0/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #1/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #2/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #3/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #4/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #5/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #6/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #7/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #8/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #9/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #a/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #b/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #c/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #d/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #e/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #f/#0 #1 #2 #3 #4 #5 #6 #7 #8 Next |
Name
rackaslot4.osadl.orgPurpose
DevelopmentVendor/Board
(undisclosed)/(undisclosed)Distribution
Debian GNU/Linux 10 (buster)Kernel
3.8.13.14-rt27+ #312 Mon Oct 6 15:43:08 CEST 2014 unknownKernel command line
ubi.fm_autoconvert=1 mpurate=800 omapfb.vram=0:16M omapfb.rotate=0 omapfb.vrfb=y (other options undisclosed)Buildtool
gcc version 4.6.3 (Sourcery CodeBench Lite 2012.03-57)Command to generate latency plot histogram data
cyclictest -l25000000 -m -n -a0 -t1 -p99 -i800 -h400 -qDisplay most recent latency plot - Display long-term latency plot
Uptime/boot time
747 days, up since Wed, 21 Sep 22 22:35:50 +0200 (1663792550) Tag: ARM TI OMAP3 @500 MHzProcessor: 0
model name : ARMv7 Processor rev 2 (v7l) BogoMIPS : 398.13 Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc08 CPU revision : 2 Hardware : Generic OMAP3 (Flattened Device Tree) Revision : 0000 Serial : 0000000000000000
CPU scaling
Specified clock frequency: 500 MHzcpu: 0 clock 0: .resolution: 1 nsecs clock 1: .resolution: 1 nsecs clock 2: .resolution: 1 nsecs
Vulnerable to Y2038
Graphics adapter
omapfbCurrent resolution
1280x800Disk /dev/mtdblock0: 253.5 MiB, 265814016 bytes, 519168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes/dev/sda:
ATA device, with non-removable media Model Number: TOSHIBA MK2559GSX Serial Number: Y0P5S088S Firmware Revision: GK003A Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6 Standards: Supported: 8 7 6 5 Likely used: 8 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 488397168 Logical Sector size: 512 bytes Physical Sector size: 4096 bytes device size with M = 1024*1024: 238475 MBytes device size with M = 1000*1000: 250059 MBytes (250 GB) cache/buffer size = 8192 KBytes Form Factor: 2.5 inch Nominal Media Rotation Rate: 5400 Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 128 DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set SET_MAX security extension * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * WRITE_{DMA|MULTIPLE}_FUA_EXT * 64-bit World wide name * IDLE_IMMEDIATE with UNLOAD * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * Idle-Unload when NCQ is active DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Write Same (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count supported: enhanced erase 78min for SECURITY ERASE UNIT. 78min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50000392e58078b7 NAA : 5 IEEE OUI : 000039 Unique ID : 2e58078b7 Checksum: correct Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors Disk model: External Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00000000 Device Boot Start End Sectors Size Id Type /dev/sda1 2048 33556479 33554432 16G 83 Linux /dev/sda2 33556480 50333695 16777216 8G 82 Linux swap / Solaris /dev/sda3 50333696 488397167 438063472 208.9G 83 Linux
Network
Interfaces
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu lo: flags=73<UP,LOOPBACK,RUNNING> mtu