2017-06-27 - 17:46
CPU - Timers - Features - RAM - Graphics - Disks - Kernel

Name

rackbslot3.osadl.org

Purpose

Development

Vendor/Board

RS Components/Raspberry Pi 2

Distribution

Raspbian GNU/Linux 8 (jessie)

Kernel

4.9.24-v7+ #993 SMP Wed Apr 26 18:01:23 BST 2017 unknown

Kernel command line

8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.fiq_enable=0 dwc_otg.fiq_fsm_enable=0 dwc_otg.lpm_enable=0 earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait

Buildtool

gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)

Command to generate latency plot histogram data

cyclictest -l100000000 -m -Sp99 -i200 -h400 -q
Display most recent latency plot - Display long-term latency plot

Uptime

19 days

CPU info To top

processor : 0
model name	: ARMv7 Processor rev 4 (v7l)
BogoMIPS	: 38.40
Features	: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4
processor : 1
model name	: ARMv7 Processor rev 4 (v7l)
BogoMIPS	: 38.40
Features	: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4
processor : 2
model name	: ARMv7 Processor rev 4 (v7l)
BogoMIPS	: 38.40
Features	: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4
processor : 3
model name	: ARMv7 Processor rev 4 (v7l)
BogoMIPS	: 38.40
Features	: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4
Hardware	: BCM2835
Revision	: a02082
Serial		: 000000008416f3ba


CPU scaling To top

Specified clock frequency: 900 MHz
Default scaling setting:
CPU0: ondemand from 600 to 700 MHz
CPU1: ondemand from 600 to 700 MHz
CPU2: ondemand from 600 to 700 MHz
CPU3: ondemand from 600 to 700 MHz

Interrupts To top

Timer resolution To top

cpu: 0
 clock 0:
  .resolution: 1 nsecs
 clock 1:
  .resolution: 1 nsecs
 clock 2:
  .resolution: 1 nsecs
 clock 3:
  .resolution: 1 nsecs
cpu: 1
 clock 0:
  .resolution: 1 nsecs
 clock 1:
  .resolution: 1 nsecs
 clock 2:
  .resolution: 1 nsecs
 clock 3:
  .resolution: 1 nsecs
cpu: 2
 clock 0:
  .resolution: 1 nsecs
 clock 1:
  .resolution: 1 nsecs
 clock 2:
  .resolution: 1 nsecs
 clock 3:
  .resolution: 1 nsecs
cpu: 3
 clock 0:
  .resolution: 1 nsecs
 clock 1:
  .resolution: 1 nsecs
 clock 2:
  .resolution: 1 nsecs
 clock 3:
  .resolution: 1 nsecs

Clock source To top

arch_sys_counter

Trace clock

local

Lazy preemption

no

RAM To top

945 MB

Graphics To top

Graphics adapter
BCM2708 FB
Resolution
656x416
Chipset
BCM2708 FB
Acceleration
soft
X server version

Block devices To top

/dev/mmcblk0:

Disk /dev/mmcblk0: 14.9 GiB, 16003891200 bytes, 31257600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0cf63fa8

Device         Boot  Start      End  Sectors  Size Id Type
/dev/mmcblk0p1        8192   131071   122880   60M  c W95 FAT32 (LBA)
/dev/mmcblk0p2      131072 31257599 31126528 14.9G 83 Linux

Network

Interfaces
eth0 Link encap:Ethernet
lo Link encap:Local
wlan0 Link encap:Ethernet
Topology
rbswitch/port #3

Kernel configuration To top

(Erroneously not configured when building the kernel)
   To top

Valid XHTML 1.0 Transitional